The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by DT Research can invalidate FCC approval.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. These devices generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:.
Please review the following material carefully. Failure to follow the instructions, or failure to heed the warnings contained in this manual could lead to serious injury. The following are special precautions you should take when using and handling batteries.
Failure to follow this instruction may result in battery burst or liquid leak, and may cause fire, or injury. Never dispose of the battery by burning. Any such action may result in excessive heating, explosion, or fire. Any such action may result in excessive heat, explosion, or ignition. Avoid exposure to water. This manual describes the how to set up and use IntelliTouch ScreenLogic, including how to configure your IntelliTouch system using the Configurator utility, and how to use the ScreenLogic program to control basic everyday pool and spa operations to advanced setup functions that only need to be performed once.
Also, location recommendations. Each dialog description is followed by more detailed information and examples of the features. Each screen description is followed by more detailed information about how to use ScreenLogic features. Also includes troubleshooting information. Also, includes information about HomeLogic management and control solutions. Web site: visit www. This innovation in pool and spa automation offers complete freedom for you while having full automation control over your pool, spa, lights, heater, cleaners and much more.
You can now schedule multiple start and stop times to control your lights, heater, spa jets, and filter pumps. The ScreenLogic historical data feature monitors energy use for your pool, spa and lighting equipment and also records pool, spa, and air temperatures. This historical data provides a convenient way to help you conserve energy. An in-wall Touch Screen and a program for your PC are also available.
IntelliTouch ScreenLogic is a scalable system that can be upgraded to a completely integrated home automation solution including audio, security, climate, irrigation and more. This manual describes how to install, configure, and operate the IntelliTouch ScreenLogic system. Before learning how the IntelliTouch ScreenLogic system works, familiarize yourself with the various wireless and wired controllers included with each IntelliTouch Personality kit. IntelliTouch systems offer the flexibility to handle from five to 40 circuits that can be used to control any combination of pumps, lights, water features, etc.
As an added benefit, user-configurable circuits can also be used to control these combinations of features and more. The Feature Macro circuits feature allows any number of circuits to be combined on a single button.
Not available with IntelliTouch model i5 or i5S. The dimmer module supports multiple lights from watts up to 1, watts and installs in a standard relay location. Any number of dimmers up to 10 maximum may be used with a maximum combined load of 4, Watts in a single IntelliTouch load center. Amaximum of four ScreenLogic interfaces can be used. Located near your spa, the iS10 or iS4 spa-side remote provide control buttons for various pool and spa functions.
The iS10 spa-side remote also provides a temperature display. The pool service person can periodically check pool operations from this unit. The load center is also where the various IntelliTouch controllers interface with the other equipment. Mounted on of top the valves you may also find motorized valve actuators used to change the flow of water through the plumbing. There may also be temperature sensors and cabling to the heater.
There should be no need for anyone other than your service person to periodically check this equipment. Multiple knockouts for different sizes of conduit are supplied as well as a GFCI side knockout. The Load Center provides ample space for all high and low voltage wiring needs. The Power Center does not include a circuit breaker base. The Personality Kit models are:. Fiverelaysareincludedin the Load Center. Tworelays are included in the kit and five in the Load Center.
Fourrelays are included in the kit and five in the Load Center. Five relays are included in the kit and five in the Load Center. There are five relays in the IntelliTouch Load Center. Four relays are included in the kit and five in the Load Center. Pool and Spa owners can choose one or more of the following interface options to control the IntelliTouch system throughout their home. The in-wall Touch screen is custom configured for IntelliTouch systems. The Tablet is custom configured for IntelliTouch systems.
Connects to Personality board in Load Center. Allows any IntelliTouch wired system to also have a wireless remote with all the capabilities of the Indoor Control Panel. With an average range of feet, pool owners have system control anywhere around the home or yard. Powered by a rechargeable lithium-ion battery. Includes anAC adapter for recharging. Connects to the provided wireless router and Protocol adapter via Ethernet RJ45 for control of IntelliTouch pool and spa systems.
The in-wall Touch Screen is custom configured for IntelliTouch systems. Receives and transmits commands via the Transceiver antenna located at the Load or Power Center.
The main control center. Includes the Outdoor Control Panel that controls pump, heater, and light relays. Receives commands via Protocol adapter, and wireless and wired control panels connected to the Personality board. Sends and receives commands to and from the MobileTouch control panel. As you unpack your IntelliTouch ScreenLogic Kit, please check to make sure that you received the items listed below.
If any item is missing or damaged, contact your authorized dealer, or contact Technical Support see page viii. Refer to the manufacturers documentation for kit contents. Up to a total of four ScreenLogic interfaces can be used with an IntelliTouch system. If you need additional interfaces, first order one of the ScreenLogic interface kits listed above, then order one or more of the following accessory interfaces accessory kits:.
Note: The above Accessory Kits interfaces do not include a Protocol adapter or wireless router. This device also offers a wide range of capabilities. For more detailed information about the PDA, refer to the manufacturers documentation shipped with the device. Calendar button. C ompactFlash card and Secure Digital memory card slots top. Home button. Inbox button. Navigator button. Infrared Sensor: The infrared sensor lets you transfer files from your device to another infrared-compatible device without using cable connections.
Not used by IntelliTouch ScreenLogic. Microphone: Use to record audio. Wireless Light: Illuminates when transmitting and receiving data. Stylus: Use the stylus to write or draw on the screen. To remove the stylus, pull it straight up and out of the holder.
To avoid losing the stylus, store the stylus in the holder when you are not using it. Ensure that the stylus is oriented correctly when you replace it in the slot. Power Button: Press the power button to turn the device on or off.
Press and hold the power button to dim the display. Repeat to light the display. Touch Screen: Use the touch screen and the stylus to enter information into your device. Bluetooth is not used by IntelliTouch ScreenLogic. Switch off the wireless device to conserve power. Home Button: Press this button to launch the Home window or to turn on the device. Navigator Button: Press the right, left, top, or bottom of the navigator button to move the cursor on the screen.
Press the center to enter a selection. Contacts Button: Press this button to launch Contacts or to turn on the device. Calendar Button: Press this button to launch Calendar or to turn on the device. Record Button: Press this button to start recording audio.
Lock Button: Use lock the device, keys and touch screen. Battery Lock: Use this switch to release and remove the. The operating software is Windows CE. NET bringing with it numerous applications, including support for Internet browsing, Windows Media Player, local e-mail client, and word processing. To input text into the Digital Tablet, press this button to display the virtual keyboard.
Tap the desired letters to enter text. Press the button again to close the keyboard. Not used by IntelliTouch ScreenLogic program. Does not work when IntelliTouch ScreenLogic is running. Only required if Tablet stops responding. Featuring a robust magnesium alloy enclosure, the. Tap the Ctrl key, then the Q key to exit the.
When it is blinking amber, it indicates that the battery is charging. This will only happen when the Digital Tablet is plugged into the AC power.
In the absence ofAC power, the steady green state indicates a full or good battery level; when the battery charge is low, it will glow a steady amber; when the battery level is critically low, it will blink in amber rapidly.
Please read the following important information before operating your ScreenLogic interface. Before you use this device, please read this manual for setup procedures, safety precautions, and other important information. Please review the contents even if you are an experienced user.
If you have any problems, contact Technical Support. For Technical Support contact information refer to page viii. Do not expose the device to moisture.
Where possible, the Tablet and PDAshould be facing away from direct lighting to reduce glare. You will lose any product warranty on the product. You may use the Suspend Button to cold-boot or Restart the Digital Tablet in the unlikely event of device lockup. The device will be turned off.
To cold-boot or restart the in-wall touch screen, press and hold for four-seconds the round four-way directional button on the front of the in-wall touch screen. Insert the stylus into the reset hole on the back of the PDA to cold-boot or reset.
Only required if the PDA stops responding or has wireless connection problems. Your system settings such as date, time, screen brightness can be saved in flash memory. Tap the Save Current Settings check box.
Tap OK in Message dialog, to save your settings into persistent storage. Tap OK again to confirm. Tap OK to exit. Awarning message will be generated during a low battery condition and the Tablet and PDAwill shortly thereafter be placed into Forced Suspend mode if operation continues without external supply of power.
When a low battery condition occurs, the PDAwill notify you that its battery is low, then it will automatically turn off the wireless radio to conserve battery life. If the Tablet is reactivated then, the device is reset and the process amounts to a cold boot. You can also reactivate the system by briefly pressing the Suspend button with a connected AC adapter or charged external battery.
The Tablet is equipped with an internal Li-Ion battery pack that is capable of supporting approximately 2. The period between battery recharge can be significantly lengthened by putting the device into Suspend mode through the Suspend button whenever the device is not in use.
Note: The Tablet battery pack may be recharged with the providedAC adapter connected directly to the DC-in jack on the Tablet or connected to the Tablet cradle. The PDA is equipped with an internal Li-Ion battery pack that is capable of supporting approximately 3. The system hardware includes a Protocol adapter, a wireless router, and your choice of wired or wireless interface. The following describes the different set up options which depend on the type of Personality Kit being used:.
The Touch screen device is custom configured for IntelliTouch systems. The Tablet device is custom configured for IntelliTouch systems. The recommended ScreenLogic installation steps are:. If both ports are in use, you can wire into the COM port connection block. Power-up the Load Center and wireless router.
To ensure optimum wireless connection, placement of the IntelliTouch wireless router inside the home is important. Ideally, the wireless router should be positioned in the room nearest to the pool and spa location or close to where the wireless tablet or PDA will be primarily used. Your IntelliTouch ScreenLogic wireless router allows the PDA, Digital Tablet, or a wireless laptop to access the ScreenLogic interface from anywhere in and around your home up to approximately feet from the wireless router.
However, keep in mind that range is limited by the number of walls, ceilings, or other objects that the wireless signals must pass through. Typical ranges vary depending on the types of materials and background RF noise in your home. The following information can help maximize the wireless transmission and reception range:. Keep the number of walls and ceilings between the wireless router and the Tablet or PDA to a minimum - Each wall or ceiling can rob your wireless router of ft.
Position your IntelliTouch wireless router so that the number of walls or ceilings are minimized. A wall that is 1. At a two-degree angle it looks over 42 feet thick! Try to make sure that the wireless router is positioned so that the signal travels straight through a wall or ceiling for better reception.
Building materials make a difference -A solid metal door or aluminum studs may have a negative effect on range. Try to position the IntelliTouch wireless router so that the signal passes through drywall or open doorways and not other materials.
Keep your IntelliTouch wireless router away at least feet from electrical devices that generate RF noise like microwaves, monitors, electric motors, UPS units, etc. If you are using 2. Anything using the 2. For the average sized home, range should not be a problem.
If you experience low or no signal strength in areas of your home that you wish to access, consider repositioning the IntelliTouch wireless router. For Range Extender connection details, refer to page For more information about the Range Extender, see page If you have an existing wireless router in your home, it may cause interference depending on how close in proximity it is to the ScreenLogic wireless router supplied in your ScreenLogic Kit.
To minimize interference, try to maximize the distance between these two devices. Depending upon your location requirements, you may choose to have a long Ethernet cable run and a short fourwire cable run or vice-versa.
The recommended cable limits are:. Note: Afirstfloorinstallationlocationisrecommendedtomaximizethewirelesssignalstrength. However,if anupstairsinstallationistheonlyoption,forthebestreceptionitisrecommendedthattheScreenLogic wireless router be located on the floor directly above where theTablet or PDAwill be primarily used.
Note: Only required if you plan to access the Internet. Use of the ScreenLogic interface does not require an Internet connection. For more information, refer to page 20 and Wireless router and Protocol adapter with existing Indoor Control Panel option.
This is only required if you plan to access the Internet. See note at bottom of page. The second wall-plug does not require connection wires. This eliminates the existing hard wire connection from inside your home to the equipment pad. Ensure that a straight-through CAT 5 cable is used to connect to wireless router.
Acrossover Ethernet cable will not work. Use a straightthrough CAT 5 cable to connect to the wireless router. Tap into the Indoor Control Panel connector or pig tail off the four-wire cable connected to the Personality board. By connecting IntelliTouch ScreenLogic to your existing home network you will be able to take advantage of weather forecast information and current weather conditions in your area.
In addition, you can utilize the other Internet enabled applications that exist on the PDA, Tablet, and in-wall Touch Screen such as Web browsing, e-mail and much more. Use a straight-through CAT 5 cable to connect to wireless router. Acrossover cable will not work. The existing home network router can be wired or wireless.
Use a straightthrough CAT 5 cable to connect to wireless router. Note: For users with Broadband Internet connections, Pentair always recommends that the homeowner have an existing wired or wireless router connected to their DSL or Cable modem. Other wired interface options are also available to control pool and spa features via a desktop or laptop PC from within the home or on the road.
Users do not have to adjust the salt chlorine generator at the equipment pad. Adaptable to any application up volts and gallons per minute, you simply program IntelliFlo's speed to suit the application. IntelliFlo then dials in the perfect power factor. IntelliFlo constantly monitors water flow and electrical current, making sure that the filtration system is operating at peak efficiency.
IntelliTouch systems offer the flexibility to handle from 5 to 40 circuits that can be used to control any combination of pumps, lights, water features, etc. As an added benefit, user-configurable circuits Feature Circuits can also be used to control these combinations of features and more.
Feature Circuits even add Macro possibilities where any number of circuits can be combined on a single button. This gives the pool owner the ability to set up "themes" with custom names all with one press of a single button. The dimmer module supports multiple lights from watts up to 1, watts and installs in a standard relay location. Any number of dimmers up to 10 maximum may be used with a maximum combined load of 4,W in a single Load Center. The Load Center provides ample space for all high and low voltage wiring needs Power Center- Offers a smaller footprint than the Load Center.
The Power Center does not include a circuit breaker base. This protocol adapter adds Pansasonic video camera support up to 4 sold separately and UPB lighting support sold separately Accessories Product Description Approx. Weight lbs. Each dimmer module supports multiple lights from watts up to 1, watts combined load using VAC VAC not supported.
For example, a W and W Ameriite total W could be used with one dimmer module. Installs in a standard relay location. Any number of dimmers up to 10 maximum may be used with a maximum combined load of 4,W. The IntelliTouch Dimmer Module is only designed to be used with pool and spa lights and not backyard lighting systems.
Operated within feet range of Load or Power Center. The IntlliTouch system determines which heat source is appropriate given the conditions.
This kit disables any solar heating controls. The kit includes a heater relay and temperature sensor. Additional interface option Light Direct Connect Kit eliminates need for j-box Telelphone remote control for any single circuit, usually Spa mode.
Post it in our Discussion Forum. You'll get answers from Pentair Customer Service, pool professionals and pool owners who can help with troubleshooting and recommendations.
0コメント